Innensechskantschlüssel（Tip Type：Kugelkopf Seite 3）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
L-förmiger Kurzschaft-Schraubenschlüssel mit langem Kugelkopf, BLB-S
MAEDAKINNZOKU
Hexagonal bar wrench ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
[Features]
· Uses a special alloy to enhance torque, durability, and abrasion resistance.
· High-level heat treatment/hard chrome plating treatment.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· L-shaped long type with a short underhead length.
[Applications]
· Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.- Mengenrabatt
Jetzt konfigurierenab∗ ： 7.28 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Satz L-förmiger Schraubenschlüssel, kurz, langer Kugelkopf, BL700S
MAEDAKINNZOKU
A short type hex wrench where the length of the neck has been made as short as possible.
[Features]
· Uses a special alloy to enhance torque, durability, and abrasion resistance.
· High-level heat treatment/hard chrome plating treatment.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· 7-piece set. L-shaped long type with a short underhead length.
[Applications]
· Ideal for assembly and maintenance work of industrial machinery and electronic equipment.
· Ideal for assembly and maintenance work of automobiles, motorcycles and bicycles.- Mengenrabatt
Jetzt konfigurierenab∗ ： 66.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Satz L-förmiger Schraubenschlüssel, kurz, langer Kugelkopf, BLB900S
MAEDAKINNZOKU
Hexagonal bar wrench set ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
[Features]
· Minimized neck length L-shaped long type.
· 9-piece set.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· Uses a special alloy to enhance torque, durability, and abrasion resistance.
· High-level heat treatment/hard chrome plating treatment.
[Applications]
· Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.- Mengenrabatt
Jetzt konfigurierenab∗ ： 112.90 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 18.86 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Satz Innensechskantschlüssel (extra lang, 8 Stück pro Satz)
EIGHT TOOL
The ballpoint is machined into a spherical shape so that it can be used by tilting approximately 25°, allowing bolts to be temporarily tightened more quickly and improving workability. Holders are designed for easy removal and storage of hex key, preventing loss, and for convenient carrying and keeping.- Mengenrabatt
Jetzt konfigurierenab∗ ： 86.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Satz Innensechskantschlüssel (Taper Head®, extra lang, 9 Stück pro Satz, Zoll) (mit Rohr)
EIGHT TOOL
Pipe adapter developed exclusively for 2-stage holders can store 2 pipes comfortably without becoming unwieldy. Pipes are included, so it is ideal for retightening. Durability and wear resistance are further improved so that the Taper Head can be used for final tightening. The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).- Mengenrabatt
Jetzt konfigurierenab∗ ： 118.83 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Taper Head®, extra lang)
EIGHT TOOL
Sizes are colored to be easily distinguishable and baked coating is luxurious and unlikely to peel off. 2.5-10 mm also come with a silk print size indication. Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening. The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).- Mengenrabatt
Jetzt konfigurierenab∗ ： 28.37 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Taper Head®, extra lang), Satz
EIGHT TOOL
Sizes are colored to be easily distinguishable and baked coating is luxurious and unlikely to peel off. 2.5-10 mm also come with a silk print size indication. Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening. The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).- Mengenrabatt
Jetzt konfigurierenab∗ ： 121.88 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Innensechskantschlüssel (Taper Head®, sehr lang) (mit Ummantelung)
EIGHT TOOL
Easy to identify size with coloring of boots. Even if the wrench is broken, the boot prevents the scattering of fragments.- Mengenrabatt
Jetzt konfigurierenab∗ ： 17.24 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel
TRUSCO NAKAYAMA
Each surface of the edge of the Allen wrench tip is evenly chamfered. Compared to the standard product, it features outstanding high torque, durability, and abrasion resistance. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact. Matte chrome plating.- Mengenrabatt
Jetzt konfigurierenab∗ ： 8.85 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Kugelkopf-Innensechskantschlüssel, rostfreier Edelstahl (Standard)
TRUSCO NAKAYAMA
A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant.- Mengenrabatt
Jetzt konfigurierenab∗ ： 6.15 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel, rostfreier Edelstahl (Standard)【9 Stk. pro Packung】
TRUSCO NAKAYAMA
A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.- Mengenrabatt
Jetzt konfigurierenab∗ ： 86.85 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel, rostfreier Edelstahl (Lang)【9 Stk. pro Packung】
TRUSCO NAKAYAMA
A long ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.- Mengenrabatt
Jetzt konfigurierenab∗ ： 110.44 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Kugelkopf-Innensechskantschlüssel (Zoll)
TRUSCO NAKAYAMA
Machined with a ball point, it can be used tilted by approximately 25°, speeding up temporary tightening of bolts, and increasing workability. Black oxide treated. Made from chrome vanadium steel.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.63 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel, T-förmiger Griff
TRUSCO NAKAYAMA
T handle type 2-point fastening type. The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach. Hardness is HRC 55 to 60. Made from chrome vanadium steel.- Mengenrabatt
Jetzt konfigurierenab∗ ： 109.80 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Satz Innensechskantschlüssel, Kugelkopf, gebogen, Vierkant
TRUSCO NAKAYAMA
[Features]
· It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
· The special processing technology provides high durability and abrasion resistance.
· Final tightening can also be performed with the ball point part.- Mengenrabatt
Jetzt konfigurierenab∗ ： 85.22 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel, Kugelkopf, gebogen, Vierkant
TRUSCO NAKAYAMA
[Features]
· It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
· The special processing technology provides high durability and abrasion resistance.
· Final tightening can also be performed with the ball point part.- Mengenrabatt
Jetzt konfigurierenab∗ ： 6.75 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Satz Kugelkopf-Innensechskantschlüssel
ASAHI METAL INDUSTRY
[Features]
· Since the tip planar angle of the hexagonal bar is chamfered evenly on each side, it is easy to insert it into hexagon sockets.
· Screws can be rotated from angles up to a maximum of 25° with the ballpoint tip, making work easy and quick even in narrow places.
· Hardness: HRC 54-59
[Applications]
· Tightening and loosening work for hex socket bolts and hex socket set screws.- Mengenrabatt
Jetzt konfigurierenab∗ ： 48.90 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Satz Halbkugelkopf-Innensechskantschlüssel (Halblang)
TRUSCO NAKAYAMA
[Features]
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.- Mengenrabatt
Jetzt konfigurierenab∗ ： 94.80 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Satz langer Kugelkopf-Innensechskantschlüssel
ASAHI METAL INDUSTRY
[Features]
· Since the tip planar angle of the hexagonal bar is chamfered evenly on each side, it is easy to insert it into hexagon sockets.
· Screws can be rotated from angles up to a maximum of 25° with the ballpoint tip, making work easy and quick even in narrow places.
· Hardness: HRC 54-59
[Applications]
· Tightening and loosening work for hex socket bolts and hex socket set screws.- Mengenrabatt
Jetzt konfigurierenab∗ ： 58.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Gerändelter Innensechskantschlüssel
PB SWISS TOOLS
Knurling prevents slippage, allowing the user to work safely even with oiled or wet handsJetzt konfigurierenab∗ ： 13.82 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Type |
| Tip Type |
| Width across flat dimension(mm) |
| Width across flat dimension(Inch) |
| Single Product/Set Classification |
| Overall length (L dimension)(mm) |
| Hex bar wrench underneck length (H dimension) L-shape only(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | EIGHT TOOL | EIGHT TOOL | EIGHT TOOL | EIGHT TOOL | EIGHT TOOL | EIGHT TOOL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ASAHI METAL INDUSTRY | TRUSCO NAKAYAMA | ASAHI METAL INDUSTRY | PB SWISS TOOLS |
| Artikelserie | L-förmiger Kurzschaft-Schraubenschlüssel mit langem Kugelkopf, BLB-S | Satz L-förmiger Schraubenschlüssel, kurz, langer Kugelkopf, BL700S | Satz L-förmiger Schraubenschlüssel, kurz, langer Kugelkopf, BLB900S | Satz Innensechskantschlüssel (Taper Head®, extra lang, 9 Stück pro Satz, Zoll) (mit Rohr) | Innensechskantschlüssel (Taper Head®, sehr lang) (mit Ummantelung) | Kugelkopf-Innensechskantschlüssel, rostfreier Edelstahl (Standard) | Kugelkopf-Innensechskantschlüssel, rostfreier Edelstahl (Standard)【9 Stk. pro Packung】 | Kugelkopf-Innensechskantschlüssel, rostfreier Edelstahl (Lang)【9 Stk. pro Packung】 | |||||||||||||
| ab∗ | 7.28 € *Stückpreis Standardkonfiguration Mengenrabatt | 66.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 112.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.86 € *Stückpreis Standardkonfiguration Mengenrabatt | 86.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 118.83 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 121.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.24 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 8.85 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.15 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 86.85 € *Stückpreis Standardkonfiguration Mengenrabatt | 110.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.63 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 109.80 € *Stückpreis Standardkonfiguration Mengenrabatt | 85.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 48.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 94.80 € *Stückpreis Standardkonfiguration Mengenrabatt | 58.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.82 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 9 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
| Type | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | Ausführung T | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel |
| Tip Type | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf |
| Width across flat dimension(mm) | - | 1.5 ～ 6 | - | 10 | 1.5 ～ 8 | 1.5 ～ 10 | 10 | 1.5 ～ 10 | 1.5 ～ 10 | 8 | 4 ～ 10 | 1.5 ～ 10 | 1.5 ～ 10 | - | 2 ～ 10 | - | - | - | - | - | - |
| Width across flat dimension(Inch) | 1/4 ～ 7/32 | - | 1/4 ～ 5/64 | - | - | - | - | - | - | - | - | - | - | 0.05 ～ 9/64 | - | - | - | - | - | - | - |
| Single Product/Set Classification | Einzelstück | Produktsatz | Produktsatz | Einzelstück | Produktsatz | Produktsatz | Einzelstück | Produktsatz | Einzelstück / Produktsatz | Einzelstück | Einzelstück | Produktsatz | Produktsatz | Einzelstück | Produktsatz | Produktsatz | Einzelstück | Produktsatz | Produktsatz | Produktsatz | - |
| Overall length (L dimension)(mm) | 90 ～ 224 | - | - | 112 | - | - | 224 | - | 225 ～ 260 | 156 | 106 ～ 170 | - | - | 72 ～ 101 | - | - | 91 | - | - | - | - |
| Hex bar wrench underneck length (H dimension) L-shape only(mm) | 4 ～ 18 | - | - | 19 | - | - | 40 | - | 32 ～ 36 | 36 | 25 ～ 40 | - | - | 12 ～ 20 | - | - | 16 | - | - | - | - |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Type
-
L-förmiger Sechskantschlüssel
-
Ausführung T
- Messerform
- Dazugehöriges Produkt
- Sonstige
-
L-förmiger Sechskantschlüssel
-
Tip Type
-
Standardausführung
-
Kugelkopf
- Innensechskant, manipulationssicher
- Sonstige
-
Standardausführung
-
Width across flat dimension(mm)
- 0,05
- 0,7
- 0,9
- 0,71
- 0,89
- 0.71
- 0.89
- 1
- 1/ 2
- 1,3
- 1/ 4
- 1,5
- 1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
10,0 - 1,5 bis 5
- 1,5 bis 6
- 1,6 (1/16")
- 1/ 8
- 1/16
- 1,27 (1/20")
- 1.27
- 1.27～4.8
- 1.5
- 2
- 2,0
- 2,4 (3/32")
- 2,5
- 2.5
- 3
- 3,0
- 3,2 (1/8")
- 3/4*
- 3/ 8
- 3/16
- 3/32
- 3.5
- 4
- 4.5
- 5
- 5/ 8
- 5/16
- 5/16*
- 5/32
- 5/32*
- 5/64
- 5/64*
- 5.5
- 6
- 7
- 7/8*
- 7/16*
- 7/32
- 8
- 9/32*
- 9/64
- 10
- 12
- 14
- 17
- 19
- 21
- 22
- 24
- 27
- 30
- 32
- 36
-
Width across flat dimension(Inch)
-
Single Product/Set Classification
- Einzelstück
- Produktsatz
-
Overall length (L dimension)(mm)
- 34
- 35
- 40
- 45
- 45、50、56、63、70、79、90
- 45、50、56、63、70、79、90、100、112
- 46
- 47
- 49
- 50
- 51
- 52
- 56
- 58
- 59
- 60
- 61
- 62
- 63
- 65
- 69
- 70
- 71
- 72
- 74
- 75
- 77
- 78
- 80
- 81
- 83
- 84
- 85
- 85 (When stowed)
- 86
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 100
- 101
- 102
- 103
- 105
- 106
- 107
- 110
- 111
- 112
- 113
- 115
- 118
- 119
- 120
- 122
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 139
- 140
- 142
- 144
- 145
- 146
- 150
- 151
- 153
- 154
- 155
- 156
- 158
- 160
- 162
- 163
- 165
- 166
- 167
- 170
- 172
- 173
- 174
- 175
- 176
- 178
- 179
- 180
- 181
- 184
- 185
- 187
- 190
- 195
- 198
- 199
- 200
- 203
- 206
- 207
- 215
- 220
- 224
- 225
- 228
- 230
- 231
- 232
- 233
- 235
- 238
- 240
- 245
- 250
- 252
- 260
- 264
- 265
- 266
- 270
- 273
- 280
- 284
- 290
- 296
- 300
- 313
- 315
- 316
- 320
- 325
- 330
- 334
- 340
- 350
- 355
- 360
- 370
- 375
- 381
- 388
- 420
- 488
- 500
-
Hex bar wrench underneck length (H dimension) L-shape only(mm)
- 3.5
- 4
- 5
- 6
- 6.5
- 7
- 7.3
- 8
- 9
- 9.5
- 10
- 10.1
- 11
- 11.7
- 12
- 13
- 14
- 14、16、18、20、24、28、32
- 14、16、18、20、24、28、32、36、40
- 14.5
- 15
- 15,5
- 15.5
- 16
- 17
- 17.1
- 17.7
- 18
- 18,0
- 18.3
- 19
- 19.9
- 20
- 20,5
- 21
- 22
- 23
- 23.5
- 24
- 25
- 25.1
- 26
- 27.5
- 28
- 28.3
- 29
- 30
- 31.5
- 31.7
- 32
- 33
- 34
- 35
- 36
- 36.1
- 38
- 40
- 40.5
- 41
- 42
- 43
- 44
- 45
- 47
- 50
- 52
- 53
- 56
- 57
- 63
- 70
- 76
- 80
- 89
- 90
- 100
- 102
- 114
- 125
- 126
- 127
- 140
- 142
- 157
- 176
Marke
-
- TRUSCO NAKAYAMA (26)
- MAEDAKINNZOKU (23)
- PB SWISS TOOLS (19)
- EIGHT TOOL (17)
- KTC(KYOTO TOOL) (6)
- ASAHI METAL INDUSTRY (4)
- MITOLOY (4)
- SUPER TOOL (4)
- WAKAHOI SEISAKU (3)
- ANEX (2)
- BONDHUS (1)
- HOZAN (1)
- WERA (1)
- TSUNODA (0)
- WEIDMÜLLER (0)
- AMF (0)
- HALDER (0)
- WIHA (0)
- REYHER (0)
- VESSEL (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Innensechskantschlüssel
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Dosensenker
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Drehmomentschlüssel
- Drehmomentschrauber
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Schneidwerkzeuge
- Isolierwerkzeuge
- Werkzeuge für Elektroanlagen
- Hämmer
- Meißel
- Gravierwerkzeuge/Stanzen
- Werkzeug-Sets/Werkzeugkästen
- Cutter, Rollschneider, Skalpellmesser
- Stemmeisen / Hebel
- Auszieher
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
- Stemmwerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.