KATO MFG Werkzeuge（Product Category：Grundkörper）
Suche durch Präzisierung der Kategorie der unteren Klasse
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
RF-Serie RF Gewindeschneider
KATO MFG
[Features]
· Radial float tapper.
· Can be tapped directly into the aluminum die-cast punching holes.
· Can also be used as a reamer holder.
· Smooth misalignment absorption allows vertical threading.ab∗ ： 583.95 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
CA-Serie SKB Gewindeschneider
KATO MFG
[Features]
· For Processing Machines with High Synchronization Accuracy
· Supports center through coolant
· Ideal for high speed tapping
· Range of Work Expanded with Short Bodyab∗ ： 185.82 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
CA-Serie ECP Gewindeschneider
KATO MFG
[Features]
· Eliminates concerns about synchronization errors
· Thin pencil type
· Function is limited to tension (shallow screw set prevention)
· In combination with a TCA-S collet, it is the same length as a conventional SA-III type tapper, and so can be replaced without having to change the program.
· Tension prevents chipping, etc. even in difficult-to-machine materialsab∗ ： 334.34 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
SA-Serie HA-M Gewindeschneider
KATO MFG
[Features]
· For Synchronization Control Processing Machines
· Supports high speed tapping
· Range of Work Expanded with Short Body
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessaryab∗ ： 301.11 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
SA-Serie HA-M-OHC Gewindeschneider
KATO MFG
[Features]
· HA-M type that supports center through coolant
· Characteristics and specifications conform to the HA-M type
· The flange through oil hole type (-OHF) is available upon order
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessary
· The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
· Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
· Also Supports Mist Specificationsab∗ ： 307.33 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
SA-Serie BT-SA-III, Gewindeschneider (Flaschengriff Kegelschaft)
KATO MFG
[Features]
· Best-selling "Kato Tapper"
· Sizing type screw depth built-in limiting device
· Tapper that works with all machinery, workpieces, and cutting conditions
· Ideal for machining valuable workpieces such as prototypes, single articles, molds, etc.
· The specifications, such as the strength of the spring and extension/contraction amount, can be changed to match the usage conditions.
· The expansion device absorbs feed errors to realize high thread accuracyab∗ ： 582.22 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
SA-Serie ST-SA-III, Gewindeschneider (Zylinderschaft für Bohrfutter)
KATO MFG
[Features]
· Best-selling "Kato Tapper"
· Sizing type screw depth built-in limiting device
· Tapper that works with all machinery, workpieces, and cutting conditions
· Ideal for machining valuable workpieces such as prototypes, single articles, molds, etc.
· The specifications, such as the strength of the spring and extension/contraction amount, can be changed to match the usage conditions.
· The expansion device absorbs feed errors to realize high thread accuracyab∗ ： 453.39 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
SA-Serie BT-SA-III-OHC Gewindeschneider
KATO MFG
[Features]
· SA-III type that supports center through coolant
· Uses the TC-MO to handle feed pump pressures of up to 2 MPa.
· Mist specification can also be manufactured
· Other features/specifications are based on SA-III types
· Right-hand threads onlyab∗ ： 972.18 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
SA-Serie ST-SA-VI Gewindeschneider (Zylinderschaft für Bohrfutter)
KATO MFG
[Features]
· Short body type that can be used in various machines
· Expansion Device to Absorb Feed Errors
· Short Type Ideal for Narrow Work Spacesab∗ ： 488.85 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
SA-Serie BT-SA-IIS Gewindeschneider (Flaschengriff Kegelschaft)
KATO MFG
[Features]
· Machining Tapper with the World's Shortest Design
· Designed with an ultra-short body, it is ideal for narrow work spaces such as five-surface machine tools, turning centers, etc.
· Expansion Device to Absorb Feed Errorsab∗ ： 701.65 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
Bohr- / Gewindeschneiderset
KATO MFG
[Features]
· Drills and Taps for Standing and Radial Drilling Machines
· Quick Change set
· The drill and tap can be replaced in a single touch on the same coreab∗ ： 1,596.05 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
| Nozzle Type |
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG |
| Artikelserie | SA-Serie BT-SA-III, Gewindeschneider (Flaschengriff Kegelschaft) | SA-Serie ST-SA-III, Gewindeschneider (Zylinderschaft für Bohrfutter) | SA-Serie ST-SA-VI Gewindeschneider (Zylinderschaft für Bohrfutter) | SA-Serie BT-SA-IIS Gewindeschneider (Flaschengriff Kegelschaft) | |||||||
| ab∗ | 583.95 € *Stückpreis Standardkonfiguration | 185.82 € *Stückpreis Standardkonfiguration | 334.34 € *Stückpreis Standardkonfiguration | 301.11 € *Stückpreis Standardkonfiguration | 307.33 € *Stückpreis Standardkonfiguration | 582.22 € *Stückpreis Standardkonfiguration | 453.39 € *Stückpreis Standardkonfiguration | 972.18 € *Stückpreis Standardkonfiguration | 488.85 € *Stückpreis Standardkonfiguration | 701.65 € *Stückpreis Standardkonfiguration | 1,596.05 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage |
| Product Category | Grundkörper | Grundkörper | Grundkörper | Grundkörper | Grundkörper | Grundkörper | Grundkörper | Grundkörper | Grundkörper | Grundkörper | Grundkörper |
| Applicable Manufacturing Machinery (main unit) | Bearbeitungszentren | Bearbeitungszentren | Bearbeitungszentren | Bearbeitungszentren | Bearbeitungszentren | Bearbeitungszentren | Allgemeine Maschine | Bearbeitungszentren | Allgemeine Maschine | Bearbeitungszentren | Allgemeine Maschine |
| Spindle types | BT30 | BT30 / BT40 / BT50 | BT40 / BT50 | BT30 / BT40 / BT50 | BT30 / BT40 / BT50 | BT30 / BT40 / BT50 | - | - | - | BT50 | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | - | - | - | - | - | - | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - |
| Holder Length L(mm) | 75 ～ 112 | 98 ～ 145 | 150 ～ 195 | 90 ～ 135 | 105 ～ 210 | 120 ～ 375 | 127 ～ 174 | 195 ～ 275 | 93 ～ 140 | 84 ～ 123 | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - |
| Nozzle Type | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Product Category
- Grundkörper
- Anschlüsse/Zubehör
- Heiz- und Kühlgeräte
- Messgeräte
-
Applicable Manufacturing Machinery (main unit)
- Bearbeitungszentren
- Allgemeine Maschine
- NC-Drehmaschine
-
Spindle types
- BT30
- BT40
- BT50
- HSK-A
- HSK-E
-
HSK type
-
Tool Type
- Schaftfräser
- Bohrung
- Senker
- Walzenstirnfräser
- Hahn
- Gebohrt
-
Retainable blade diameter(mm)
- 0.25～0.50
- 0.25～ 6
- 0.3~3
- 0.3～8
- 0.45 ～0.55
- 0.45～3.25
- 0.45～4.05
- 0.45～6.05
- 0.50 to 0.75
- 0.5 to 0.75
- 0.5～5.0
- 0.5～ 6
- 0.5～6.5
- 0.5～7.0
- 0.5 ～ 8
- 0.5～8
- 0.5～ 8
- 0.5–10
- 0.5～10.0
- 0.5～13
- 0.5～13.0
- 0.5～16.0
- 0.55 ～0.65
- 0.65 ～0.75
- 0.7～0.8
- 0.7～6.0
- 0.7～6
- 0.75 ～0.85
- 0.75～1.0
- 0.75～1.00
- 0.85 ～0.95
- 0.9 to 1.0
- 0.95 ～1.05
- 1
- 1.0～0.5
- 1.0~1.25
- 1.00～1.25
- 1–4
- 1.0~6.0
- 1.0～8.0
- 1 to 13
- 1.05 ～1.15
- 1.15 to 1.25
- 1.15 ～1.25
- 1.25 ～1.35
- 1.25～1.5
- 1.25～1.50
- 1.3 to 1.5
- 1.35 ～1.45
- 1.4 to 1.5
- 1.45 ～1.55
- 1.5
- 1.5～1.0
- 1.50～1.75
- 1.5～1.75
- 1.5 to 10
- 1.5 ～10
- 1.5～20.0
- 1.55 ～1.65
- 1.55~1.75
- 1.65 ～1.75
- 1.75 ～1.85
- 1.75～2.0
- 1.75～2.00
- 1.75～10.0
- 1.75～10
- 1.8 to 2.0
- 1.85 ～1.95
- 1.95 ～2.05
- 2
- 2.0～1.5
- 2.00～2.25
- 2.0～2.25
- 2–8
- 2.0～10.0
- 2.05 ～2.15
- 2.05～2.25
- 2.15 ～2.25
- 2.25 ～2.35
- 2.25～2.5
- 2.25～2.50
- 2.3 to 2.5
- 2.35 ～2.45
- 2.4～2.5
- 2.45 ～2.55
- 2.5
- 2.5 to 2.0
- 2.50～2.75
- 2.5～2.75
- 2.5–3.0
- 2.5 ～13
- 2.5～13
- 2.5 to 16
- 2.5 ～16
- 2.5～16.0
- 2.5 ～20
- 2.5～20.0
- 2.5～20
- 2.55 ～2.65
- 2.55～2.75
- 2.65 ～2.75
- 2.675～3.175
- 2.75 ～2.85
- 2.75～3.0
- 2.75～3.00
- 2.75～3.25
- 2.75～13.0
- 2.75～16.0
- 2.75～16
- 2.8～3.0
- 2.85 ～2.95
- 2.9～3.0
- 2.925～3.175
- 2.95 ～3.05
- 2.95～3.05
- 2.95～8.05
- 3
- Up to 3
- 3.0～2.5
- 3.00～3.25
- 3~3.5
- 3.0–3.5
- 3–4
- 3–6
- 3.0–6.0
- 3～ 6
- 3～ 8
- 3–10
- 3.0～10.0
- 3 to 12
- 3.0～12.5
- 3.0～13.0
- 3 to 16
- 3.0～16.0
- 3.0~20.0
- 3.05 ～3.15
- 3.05～3.15
- 3.125～3.225
- 3.15 ～3.25
- 3.15～3.25
- 3.25 ～3.35
- 3.25～3.35
- 3.25～3.50
- 3.25～3.75
- 3.35 ～3.45
- 3.35～3.45
- 3.4~3.5
- 3.40～3.50
- 3.45 ～3.55
- 3.45～3.55
- 3.5
- 3.5～3.0
- 3.50～3.75
- 3.5～4.0
- 3.5～20.0
- 3.55 ～3.65
- 3.55～3.65
- 3.65 ～3.75
- 3.65～3.75
- 3.75 ～3.85
- 3.75～3.85
- 3.75～4.00
- 3.75～4.25
- 3.75～ 4.25
- 3.85 ～3.95
- 3.85～3.95
- 3.9～4.0
- 3.90～4.00
- 3.95 ～4.05
- 3.95～4.05
- 4
- 4.0～3.5
- 4.00～4.25
- 4~4.5
- 4.0–4.5
- 4–5
- 4 to 12
- 4.0~20.0
- 4–20
- 4.05 ～4.15
- 4.05～4.15
- 4.15 ～4.25
- 4.15～4.25
- 4.25 ～4.35
- 4.25～4.35
- 4.25～4.50
- 4.25～4.75
- 4.25～ 4.75
- 4.35 ～4.45
- 4.35～4.45
- 4.4～4.5
- 4.40～4.50
- 4.45 ～4.55
- 4.45～4.55
- 4.5～4.0
- 4.50～4.75
- 4.5–5.0
- 4.55 ～4.65
- 4.55～4.65
- 4.65 ～4.75
- 4.65～4.75
- 4.7125～4.8125
- 4.75 ～4.85
- 4.75～4.85
- 4.75～5.00
- 4.75 to 5.25
- 4.85 ～4.95
- 4.85～4.95
- 4.9~5.0
- 4.90～5.00
- 4.95 ～5.05
- 4.95～5.05
- 5
- 5.0～4.0
- 5.0～4.5
- 5.00～5.25
- 5.0～5.5
- 5～5.5
- 5–6
- 5.0～25.0
- 5.0～32.0
- 5.05 ～5.15
- 5.05～5.15
- 5.15 ～5.25
- 5.15～5.25
- 5.25 ～5.35
- 5.25～5.35
- 5.25～5.50
- 5.25～5.75
- 5.35 ～5.45
- 5.35～5.45
- 5.4～5.5
- 5.40～5.50
- 5.45 ～5.55
- 5.45～5.55
- 5.50～5.75
- 5.5–6.0
- 5.55 ～5.65
- 5.55～5.65
- 5.65 ～5.75
- 5.65～5.75
- 5.75 ～5.85
- 5.75～5.85
- 5.75～6.00
- 5.85 ～5.95
- 5.85～5.95
- 5.9～6.0
- 5.90～6.00
- 5.95 ～6.05
- 5.95～6.05
- 6
- ~6
- 6.0～5.0
- 6 to 6.5
- 6.0–6.5
- 6–7
- 6.0～25.0
- 6.05～6.15
- 6.15～6.25
- 6.25～6.35
- 6.35～6.45
- 6.4～6.5
- 6.45～6.55
- 6.5 to 7.0
- 6.55～6.65
- 6.65～6.75
- 6.75～6.85
- 6.85～6.95
- 6.9～7.0
- 6.95～7.05
- 7
- 7.0～6.0
- 7.0～7.5
- 7～7.5
- 7–8
- 7.05～7.15
- 7.15～7.25
- 7.25～7.35
- 7.35～7.45
- 7.4～7.5
- 7.45～7.55
- 7.5～8.0
- 7.5～25.4
- 7.55～7.65
- 7.65～7.75
- 7.75～7.85
- 7.85～7.95
- 7.9～8.0
- 8
- 8.0～7.0
- 8~8.5
- 8.0～8.5
- 8–9
- 8～25.4
- 8.4～8.5
- 8.5～9.0
- 8.9～9.0
- 9
- 9.0～8.0
- 9.0～9.5
- 9～9.5
- 9–10
- 9.4～9.5
- 9.5 to 10.0
- 9.9～10.0
- 10
- 10.0～9.0
- 10.0 ～10.5
- 10.0～10.5
- 10～10.5
- 10~11
- 10–16
- 10–20
- 10.4~10.5
- 10.5～11.0
- 10.9～11.0
- 11
- 11.0～10.0
- 11.0～11.5
- 11～11.5
- 11~12
- 11.4～11.5
- 11.5～12.0
- 11.9～12.0
- 12
- 12.0～11.0
- 12.0～12.5
- 12～12.5
- 12~13
- 12.4~12.5
- 12.5～13.0
- 12.9～13.0
- 13
- 13.0～12.0
- 13.0～13.5
- 13～14
- 13.4～13.5
- 13.5～14.0
- 13.9~14.0
- 14
- 14.0～13.0
- 14.0～14.5
- 14~15
- 14.4～14.5
- 14.5～15.0
- 14.9～15.0
- 15
- 15.0～14.0
- 15.0～15.5
- 15~16
- 15.4～15.5
- 15.5～16.0
- 15.9～16.0
- 16
- 16.0～15.0
- 16.0～16.5
- 16～17
- 16～25
- 16.0～25.4
- 16.0～32.0
- 16–70
- 16～85
- 16～180
- 16.4～16.5
- 16.5
- 16.5～17.0
- 16.9～17.0
- 17
- 17.0～16.0
- 17.0～17.5
- 17～18
- 17.4～17.5
- 17.5～18.0
- 17.9～18.0
- 18
- 18.0～17.0
- 18.0～18.5
- 18~19
- 18.4～18.5
- 18.5～19.0
- 18.9～19.0
- 19
- 19.0～18.0
- 19.0～19.5
- 19～20
- 19.4～19.5
- 19.5～20.0
- 19.9～20.0
- 20
- 20.0～19.0
- 20.0～20.5
- 20.5 to 21.0
- 21
- 21.0～20.0
- 21.0～21.5
- 21.5～22.0
- 22
- 22.0～21.0
- 22.0～22.5
- 22.5～23.0
- 23
- 23.0～22.0
- 23.0～23.5
- 23.5～24.0
- 24
- 24.0～23.0
- 24.0～24.5
- 24.5～25.0
- 25
- 25.0～24.0
- 25.0～25.4
- 26
- 28.0～27.0
- 30.0～29.0
- 32
- ～32
- 32.0～31.0
- 38
- 39
- 40
- 50
- Up to 50
- 75
- 80
- 100
- 125
- 150
- 160
- 200
- 200～
-
Chuck Type
- Gerade Klemmhülse
- Aufgeschrumpft
- Seitenverriegelung
-
Holder Length L(mm)
- 15.5
- 16
- 16.5
- 19.5
- 24.5
- 26.5
- 29
- 29.5
- 30
- 33
- 34
- 35
- 35.6
- 37
- 38
- 40
- 43
- 44
- 44.1
- 44.8
- 45
- 47
- 48
- 50
- 50.5
- 52
- 53
- 54
- 54.6
- 55
- 55.5～62.5
- 56
- 57
- 58
- 60
- 60.8
- 61.5
- 62
- 62.5
- 63
- 64.6
- 65
- 65.5～72.5
- 66
- 67
- 67.5
- 68
- 68.5
- 68.6
- 70
- 71
- 73.6
- 74
- 75
- 76.5
- 76.5～83.5
- 77
- 79
- 79.5～91.5
- 80
- 81
- 81.5
- 82
- 84
- 84.5
- 84.5～96.5
- 85
- 85.5
- 86.1～97.1
- 87.5～94.5
- 90
- 90.5
- 91
- 92
- 93
- 94.5
- 95
- 95/135/165
- 95.6
- 96
- 97
- 97.1～108.1
- 97.5
- 98
- 100
- 100/140/170
- 100.2
- 101.6
- 102.1～113.1
- 105
- 105/145/175
- 105.5
- 107
- 107.5
- 108.8
- 109
- 110
- 111.5
- 112
- 113
- 115
- 115.5～122.5
- 120
- 120/160/190
- 121
- 122
- 123
- 125
- 125/175/205
- 127
- 129.5
- 130
- 130/180/210
- 131.5
- 132
- 135
- 137
- 137.1～148.1
- 137.5
- 140
- 140/190/220
- 142
- 143
- 145
- 145/195/225
- 148
- 149.5
- 150
- 155
- 156
- 160
- 160.5～167.5
- 163
- 165
- 167.5
- 170
- 174.0
- 175
- 175.5～182.5
- 176.5
- 180
- 181
- 182.1～193.1
- 185
- 187
- 190
- 192
- 195
- 197.1～208.1
- 200
- 202.5
- 210
- 218
- 220
- 225
- 226.0
- 240
- 250
- 255
- 275
- 279
- 283
- 285
- 300
- 375
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
- Hülse mit mittiger Öffnung (Klingenschutzhülse)
- Lücke
-
Nozzle Type
- Adapter
- Steckverbinder
- Rückschlagventil
- Düse
- Ventil
- Zangen
- Schlauch
- 関連部品・用品
Suchergebnisse durch Herstellerauswahl einschränken
-
- NIKKEN KOSAKUSHO (57)
- YUKIWA SEIKO (42)
- BIG KAISER (24)
- MANYO TOOLS (23)
- KATO MFG (11)
- TAKURA KOGU (11)
- SHOWA TOOL (5)
- NIIGATA SEIKI (1)
- BLUEBIRD (0)
- NEW STRONG (0)
- TSCHORN (0)
- FUJI TOOL (0)
- TOHIN SHOJI (0)
- AMF (0)
- ALBRECHT (0)
- SHINWA RULES (0)
- MITUTOYO (0)
- NIKKI (0)
- KASAHARA (0)
- OSG (0)
- NOGAJAPAN (0)
- SANDVIK (0)
- NT TOOL (0)
- FUSO SEIKI (0)
- NORELEM (0)
- TRUSCO NAKAYAMA (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Werkzeuge
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.